Skip to content

Documentation · EMR & EHR

Setting up your EHR step by step

Sixteen numbered steps to set up a practice-management or EHR system for a solo practice, in the order that saves retyping, with the costs that sit on top of the plan and two questions to settle before the trial ends.

By Oregon Healers Updated 7 min read Lesson 1 of 3 in Documentation Take the quiz 1 document

This lesson sets up an electronic health record (EHR), or practice-management system, for a new solo practice, in order. I wrote it without naming a product, because the sequence is the same in any of them: the account first, then your services, then what the client sees, then insurance. Menus differ and screens change, so for the clicks themselves your vendor's help center is the reference. What follows is what to enter, in what order, and what to ask before you pay. It assumes you have worked through the practice setup checklist and have your NPI, license details and forms ready.

Why this order

Each step reuses what an earlier one stored. A location needs the practice address. A session is billed from a location under a service code, a default rate hangs on that code, and an insurance claim pulls all of them plus your NPI. Entered in this order, each fact is typed once.

Account steps 1 to 4 trial, BAA, practice details, locations Services steps 5 to 8 telehealth, codes, rates, availability Client side steps 9 to 13 portal, forms, notes, payments, autopay Insurance, extras steps 14 to 16 enrollments, public profile, calendar sync Each stage reuses what the one before it stored.
Account steps 1 to 4 trial, BAA, practice details, locations Services steps 5 to 8 telehealth, codes, rates, availability Client side steps 9 to 13 portal, forms, notes, payments, autopay Insurance, extras steps 14 to 16 enrollments, public profile, calendar sync Each stage reuses what the one before it stored.
The sixteen steps fall into four stages, and the business associate agreement sits in the first.

The setup, in order

  1. Start a trial with made-up clients. If the vendor offers a free trial, use it to click through every screen below with invented names. Note which plan tier the trial runs on: a trial on the top tier shows features that the plan you intend to buy may not include.

  2. Get the business associate agreement before a real client goes in. An EHR vendor stores protected health information for you, which makes it a business associate under HIPAA, and the agreement comes before the data. Some vendors fold the BAA into the sign-up terms and others send it on request. Either way, save a copy in your BAA folder and read it against the HHS sample provisions.

  3. Enter your practice details and secure your sign-in. Use the practice name and address exactly as they appear on your disclosure statement, and add your NPI, Tax ID and license number where the system asks for them. Claims and superbills print from these fields. Turn on two-step sign-in if it is offered.

  4. Add your locations, each with a place of service code. One entry for the office and one for telehealth. The code attached to a location is what prints on claims and superbills for sessions held there; the three a therapy practice uses are in the section after this list.

  5. Set up telehealth and run a test session. Find where video links are generated and how the client receives one, then run a session against yourself from a second device before a client depends on it. The telehealth lesson covers the Oregon rules, and the consent form goes in at step 10.

  6. Create your service codes. The four from the superbills lesson cover most outpatient work: 90791 for the intake, 90834 and 90837 for individual sessions, 90847 for family or couples sessions. CPT codes belong to the American Medical Association, and software that displays them does so under an AMA license. Ask whether that license is included in the plan price or billed as a separate yearly fee per clinician.

  7. Set default rates. A rate per service code lets each new appointment fill in its fee. Use the fees printed on your disclosure statement and your Good Faith Estimate, so that all three agree.

  8. Build your availability, and decide how requests are handled. Define the hours you see clients by day, location and service. If the system takes online appointment requests, look for the setting that holds each one for your approval, so that nothing books itself before you have screened the client.

  9. Set up the client portal. This is the client's side of the account: intake forms, shared documents, invoices and appointment requests. Sign in as a test client and read every screen the way a new client would.

  10. Load your intake and consent forms. Bring your own documents: the Professional Disclosure Statement, the Notice of Privacy Practices, the telehealth consent, the fee agreement and the Good Faith Estimate. A vendor's stock consent templates are generic, so do not expect Oregon's disclosure statement (OAR 833-075-0050) to be among them. Add yours and make it a default that goes out with every new client's intake packet.

  11. Choose your note templates. Pick the progress note format you will use (the progress notes lesson compares SOAP, DAP and BIRP), and check whether your plan tier lets you edit a template or only use the stock ones.

  12. Turn on online payments. Expect the built-in card processor to charge a percentage plus a fixed amount per transaction, on top of the plan. Find the rate on the vendor's pricing page, and check that HSA and FSA cards are accepted if your clients use them.

  13. Decide on autopay. If the system can charge a stored card on its own after a session or an invoice, decide whether you want that, and say so in your fee agreement before the first charge.

  14. Set up insurance billing and submit enrollments, if you bill insurance. An enrollment tells a payer that you intend to send electronic claims, or receive electronic payment reports, through the system's clearinghouse. It does not put you on a panel. Approval is the payer's and can take weeks, so submit enrollments well before the first claim. The section on enrollments below draws the path.

  15. Decide whether to publish the vendor's public profile. Some systems include a public page or a booking link for your practice. Everything on it (fees, license, services, location) has to agree with your disclosure statement, and anything a client can request from it should still wait in your approval queue.

  16. Connect calendar sync last, and check what it sends. Syncing copies appointments to a personal calendar. If that calendar account is not covered by a BAA, set the sync to show a busy block with no client name, or leave it off.

Place of service codes for a therapy practice

Place of service (POS) codes are a CMS code set, and each location in your EHR carries one. An office is POS 11. Telehealth with the client at home is POS 10. Telehealth with the client anywhere else is POS 02. If your system creates a telehealth location for you, open it and see which code it was given. Some payers also want a modifier on telehealth claims; that is the payer's policy, so confirm it with the payer.

Two rows of the CMS place of service table. Code 10, Telehealth Provided in Patient's Home: the patient is located in their home when receiving health services through telecommunication technology, effective January 1, 2022. Code 11, Office: a location where the health professional routinely provides health examinations, diagnosis and treatment on an ambulatory basis.
CMS's own wording for codes 10 and 11. Code 02, telehealth anywhere other than the client's home, sits higher in the same table. Screenshot: cms.gov, Nov 2026

What an enrollment switches on

Three separate things move between you and a payer, and a payer can ask for a separate enrollment for each. Claims travel from your EHR through a clearinghouse to the payer. The payment report, called an electronic remittance advice (ERA), travels back the same way and lets payments post without retyping. The money itself goes from the payer to your bank by electronic funds transfer (EFT), which you set up with the payer or its payment vendor. None of the three is credentialing. An enrollment sets up the exchange of files; it does not put you on the payer's panel.

Your EHR where the claim is built Clearinghouse the vendor's or a partner's The payer you are on its panel Claims go out once the claims enrollment is approved Payment reports (ERAs) come back once the ERA enrollment is approved Your bank the deposit itself (EFT), a separate enrollment An enrollment is not credentialing. It only tells a payer where to exchange files with you.
Your EHR where the claim is built Clearinghouse the vendor's or a partner's The payer you are on its panel claims go down, payment reports (ERAs) come back claims go down, payment reports (ERAs) come back Your bank the deposit itself (EFT), a separate enrollment Enrollment is not credentialing. It only tells a payer where to exchange files with you.
Claims and payment reports pass through the clearinghouse; the deposit goes straight to your bank.

Two questions to settle before the trial ends

Oregon's record retention rules run seven years from the date of last service (OAR 833-075-0070 for LPCs and LMFTs, OAR 877-030-0100 for LCSWs). So before you pay for a first month, find out how you would export every chart, note and signed form if you ever leave, and in what file format. Ask support in writing and keep the answer. Second, add up the real monthly cost: the plan, the CPT license if it is billed separately, card processing, and any per-claim fees if you bill insurance. The plan price is only the first line of that sum.

This is not legal, tax or accounting advice, and it is not a product recommendation. I wrote down the order and the questions to ask; your vendor's help center is the authority on its own software, and a CPA or attorney is the authority on your situation.

Further reading

Last reviewed November 2026.

Documents

Templates and worksheets that go with this lesson.

  • SimplePractice setup checklist

    simplepractice-setup-checklist.pdf · 7 KB · PDF

    Download

Check what you learned

10 questions from this lesson. Answers are checked as you go; nothing is recorded.

  1. 1 / 10

    What is the first step in the setup sequence for SimplePractice?

    Hint

    The lesson lists the setup order at the beginning.

  2. 2 / 10

    Which tier does the free trial open on, allowing you to see every feature?

    Hint

    The trial runs 30 days with no card and opens on a specific tier.

  3. 3 / 10

    Where do you add a new office location in SimplePractice?

    Hint

    The lesson describes the path for adding office locations.

  4. 4 / 10

    What must be assigned to the Video Office for telehealth appointments?

    Hint

    Telehealth appointments need a specific assignment for links and reminders.

  5. 5 / 10

    Which feature must be enabled before you can build your availability?

    Hint

    The lesson says to turn on this feature before setting availability.

  6. 6 / 10

    What is the limit of note templates for Starter accounts?

    Hint

    The lesson mentions template limits for Starter accounts.

  7. 7 / 10

    When does AutoPay charge a client’s stored default card?

    Hint

    The AutoPay article describes the timing of the charge.

  8. 8 / 10

    What does an enrollment with a payer allow you to do?

    Hint

    The lesson clarifies the purpose of enrollments.

  9. 9 / 10

    Which sync tier provides two‑way Google sync and shows personal events inside SimplePractice?

    Hint

    The lesson compares basic and advanced sync tiers.

  10. 10 / 10

    How long must Oregon records be retained according to the lesson?

    Hint

    The lesson mentions Oregon’s record retention rule.